- Description
- Documents
Servo KST X08 • 8mm • 2.8kg/cm @ 8,4V
A wing digital servo with 8mm thickness is suitable for models up to 1000g take-off weight and 8 to 8.4 Volt supply voltage. Sturdy aluminium housing and metal gearboxes as well as an operating voltage of 4.8 - 8.4V ensure a very wide range of applications for the servo. The servos are available in three mounting variants: standard brackets (S) (horizontal) - for the classical vertical installation; mounting with screws and vertical brackets (H) and without mounting brackets - to be glued into the wings in a heat-shrink tube.
Attention: for the servos with metal housing, the mounting plates should not be removed (loss of warranty).
| Dimensions | |
| Width (mm): | 8,0 |
| Length (mm): | 23,5 |
| Height (mm): | 16,8 |
| Weight (g): | 8,0 |
| Technical data | |
| Operating voltage (max.) [V]: | 8,4 |
| Servo type: | Wing |
| Motor type: | Corless |
| Gear: | Metall |
| Bearing: | 2BB |
| Electronics: | Digital |
| Actuating force | |
| kg/cm @ 3,8V: | 1,4 |
| kg/cm @ 6,0V: | 2,2 |
| kg/cm @ 8,4V: | 2,8 |
| Operating time | |
| s/60° @ 3,8V: | 0,18 |
| s/60° @ 6,0V: | 0,15 |
| s/60° @ 8,4V: | 0,09 |
