- Description
- Documents
Servo KST X08 V5 • 8mm • 2.8kg/cm @ 8,4V
Recommended for thermal gliders up to max. 500g take-off weight Optimized for F3K, F5K and RES models. Sturdy aluminium housing and metal gearboxes as well as an operating voltage of 4.8 - 8.4V ensure a very wide range of applications for the servo. The servos are available in three mounting variants: standard brackets (S) (horizontal) - for the classical vertical installation; mounting with screws and vertical brackets (H) and without mounting brackets - to be glued into the wings in a heat-shrink tube.
Attention: for the servos with metal housing, the mounting plates should not be removed (loss of warranty).
Dimensions | |
Width (mm): | 7,0 |
Length (mm): | 20 |
Height (mm): | 16,6 |
Weight (g): | 6,0 |
Technical data | |
Operating voltage (max.) [V]: | 8,4 |
Servo type: | Wing |
Motor type: | Corless |
Gear: | Metall |
Bearing: | 2BB |
Electronics: | Digital |
Actuating force | |
kg/cm @ 3,8V: | 0,8 |
kg/cm @ 6,0V: | 1,5 |
kg/cm @ 8,4V: | 1,8 |
Operating time | |
s/60° @ 3,8V: | 0,12 |
s/60° @ 6,0V: | 0,08 |
s/60° @ 8,4V: | 0,07 |