- Bulky packet info
Lightweight, high-performance electric glider controlled in all axes. Wingspan 2,75 m. Length 1310 mm, flight weight approx. 1250-1400 g. Transparent version.
Possible colours : violet/red/clear (standard) ; violet/orange/clear; violet/green/clear; violet/yellow/clear; blue/red/clear; blue/orange/clear; blue/green/clear; blue/yellow/clear; red/orange/clear; red/green/clear; red/yellow/clear; red/clear; blue/clear; violet/clear; orange/clear; green/clear; yellow/clear
Lightweight, high-performance electric glider with V-tail controlled in all axes. Marabu has two-pieces balsa built-in wing with MH32 airfoil. The wing is fixed to the fuselage with two screws. The wing and butterfly tail are both easily removable and storable for better transportation to the airport. Fibreglass fuselage is reinforced with carbon fiber, nose of the fuselage is cut off and ready to glue the motor mount and install Ø 38 mm motor with Ø 40 mm spinner and folding propeller. Good penetration and used airfoil classify the Marabu for recreational and competitive thermal flying. Thanks to large area length the model has calm and steady gliding. Using the effective flaps can be achieved very comfortable flying in thermals. Also landing due to high brake efficiency (when using the butterfly) is very comfortable.
The wing spars and leading edge made from carbon gives the wing enough strength and stiffness.The wing joiner is aluminum tube filled with carbon. The tail surfaces have the main spar and the leading edge made of carbon and the servo control is placed below the wing. Marabu will love not only fans of competition flying, but all pilots who enjoy comfortable flying in thermals or in the late afternoon calm. Really excellent flight characteristics will inspire you and you will look forward to every next flying.
The model is designed and manufactured in Czech Republic. Spare parts are available.
Content of the set:
Lightweight fuselage moulded in white tinted epoxy fiberglass + blue tinted fiberglass canopy
Two-piece wing is made in balsa framework with wing joiner, leading edges and wing spar made of carbon and covered with Oracover®
Tailplane are made in a balsa framework with carbon spar and leading edges and covered with Oracover®
Top quality accessories (servo covers, servo mount, rods, ending ties, control horns, tape for sticking flaps, fiberglass motor mount, plywood servo mount to the tail,...)
Complete assembly manual with step by step illustrations
|Wing span:||2750 mm|
|Weight:||1,25 - 1,4 kg|
|Wing area:||48,7 dm²|
|Wing loading:||22,7 - 28,8 g/dm²|
|Servos / Functions:||Elevator, rudder, ailerons, flaps, motor|