This shop uses cookies. If you stay on this page, you agree to our Cookie Policy. I agree

Profi- accucharger Pulsar 3

Item no.:  1234V
Profi- accucharger Pulsar 3 - Image 1
Profi- accucharger Pulsar 3 - Image 2
Profi- accucharger Pulsar 3 - Image 3
Profi- accucharger Pulsar 3 - Image 4
Profi- accucharger Pulsar 3 - Image 5
Profi- accucharger Pulsar 3 - Image 1Profi- accucharger Pulsar 3 - Image 2Profi- accucharger Pulsar 3 - Image 3Profi- accucharger Pulsar 3 - Image 4Profi- accucharger Pulsar 3 - Image 5
Manufacturer: ELPROG
ELPROG
Select the desired variant now:
Features:
Bundled with:
Availability:
incl. VAT and excl. shipping
Pcs.
incl. VAT and excl. shipping
Surcharges:

1500 W power and 25 A current!

A premium class balancer charger with high-tech inside!

The Pulsar 3 charger has qualities which makes a big difference to products of other manufacturers. Most of them are features which were too expensive or even too complicated for our competitors. We went through a long development time and did not like to have any technical compromises which could lower the functionality of our unrivalled charger. The developers could realize a very high accuracy and stability of all parameters at the full power spectrum of this device, also for functions like impulse or reflex. Other chargers lose a lot of time while CCV stage of charging LiXX batteries, but the Pulsar 3 uses the genuine FASTMOD function (used in Pulsar 2 and Pulsar 2+) to shorten charging time rigorous (to 30 % faster compared to standard charging mode). At the same time, the FASTMOD method is very gentle for your battery packs. The balancer for 16 cells has enough power also for future battery packs with more capacity. It uses continuous current instead of discharge impulse and is able to balance 15 cells at the same time, even with different currents. The intuitive one-button control, a big graphical display, logging of all processes on SD card, optional BT communication, different setups for usage on car battery or power supply - these are just a few features that confirm this well-engineered Pulsar 3 charger. As the developers are not satisfied by using standard PC software, they made a special software for this charger and include it in the scope of delivery.

Test: "Modellflieger" 6/7 2012 ; Test in MFI 1/13; Rotor 12/12; Aufwind 3/13; Modell Aviator 12/13; Flug Modell 5/14; Schiffs Modell 7/14

Features

  • Charging current (automatically adjustable) 0,1-5,0 A and 5,0-25 A

  • Charging power: 400 W / 12 V; 800 W / 24 V; 1200 W / 36 V; 1500 W / 48 V

  • Charging voltage 0,6-64 V; 1-34 NiCd and NiMH; 1-24 Pb; 1-14 Li-Ion; 1-14 LiPo; 1-12 LiHV; 1-16 LiFe; 1-20 LiS-ready (balances up to 16s)

  • Supply voltage 12 V (9-15,5 V); 24 V (18-31 V); 36 V (27 - 48 V); 48 V (36-60 V)

  • Powerlimiter for using with a low power power supplies (50-1800 W)

  • Separate setup parameters for usage with car battery and power supply

  • Storage program for charging/discharging to storage voltage

  • Cycles (up to 99): charge/discharge; discharge/charge (current can be set up different between charge and discharge) and format

  • Format with battery regeneration function (NiXX)

  • Permanent measurement of resistance (Ri) while charging (only impulse mode)

  • Built-in balancer up to 16 cells (simultaneous balancing up to 16 cells)

  • Max. balance current 1 A/cell (pre-setup in 4 steps: 0,0 A = no balancing - only display; 0,25 A; 0,5 A; 1,0 A)

  • Balancing only mode (whole voltage range)

  • Balancing power 60 W

  • Balancing current - automatically variable individually in 10 steps per cell

  • Intelligent balancing algorithm

  • Balancing start voltage automatically ascertainable - depends on height of cell debalancing

  • Balancing funnel-shaped - full cells means more intense balancing

  • Process memory (last processes data): 20

  • Program memory (user settings): 20

  • Charging finish identification (NiXX): Delta-peak (adjustable from 1 to 25 mV in steps of 0,5 mV); Inflex; charging time; adjusted capacity

  • Pb, Li-Ion, LiPo, LiHV, LiFe - finish voltage of charging +100 / - 200 mV adjustable

  • Fastmod (genuine) for Li-Ion, LiPo, LiHV, LiFe, Pb

  • Reflex function - (memory effect protection for NiCd & NiMH), lowers voltage drift at LiXX

  • Modes: Impulse, Reflex, adjusted for usage with power supply (Impulse mode off)

  • If not used, zero voltage at output (safety for charging batteries inside of devices, e.g. transmitter)

  • Reverse battery protection (input, output)

  • Anti-Spark circuit for battery and supply of current

  • Charger housing isolated from earth (minus); no short circuit at housing possible

  • Temperature sensor

  • Step-down/step-up converter for full charging of single cell batteries

  • Discharge process up to 100 W with external mains power supply without additional, external resistors

  • Reverse - returns discharging current to supply accu starting from 4 V

  • Protects supply accu against overcharging (in Reverse mode)

  • Adjustable min. voltage of supply accu 10,5 - 11,5V (protects against deep discharge) 10,0-11,5 V (also 24 V and 48 V)

  • Digital control converter with special digital signal prozessor (DSP: allows fast and precise control)

  • Graphical display 240 x 64 dots

  • Permanent display backlight (brightness and contrast adjustable); reverse display possible (negative)

  • Acoustic alarm (disengageable)

  • Individual configuration on SD card (possible temporary use in other devices)

  • Process logging on SD card (archive and analysis on PC possible)

  • Built-in real-time clock (time will be also logged to SD card)

  • USB connection (cable included)

  • Optional BT communication class 1 (up to 100 m range) with external antenna for communication with PC and smart phones

  • Internal cooling fan with smooth adjusting (very quiet - only one fan)

  • PC Software (bundled with charger )

  • SD card included

  • Free upgrades over internet

  • Small (No external radiator)

  • Prepared for two-way communication with PDA and mobile phones using BT (class 1)

Technical Features
Supported accu types: Ni-Cd, Ni-MH, Pb, Li-Ion, Li-Fe, Li-Pol, LiHV
Supply voltage: 12 V (10 -16 V), 24 V (20-32 V), 36 V (27-48 V), 48 V (40-60 V) car battery min. 30 Ah. recommended from 70 Ah or power supply 48V from 1500W
Charging voltage: 0,5 - 64 V
Charging current: 100 mA - 25 A (1500 W)
Discharging current: 100 mA - 25 A (400 / 800 / 1200 / 1500 W) with energy reverse 100 mA - 25 A (100 W) without energy reverse (on powersupply)
Quiescent current: 50 - 70 mA
Temperature measurement: 0 - 99 °C
Voltage measurement: 0,1 - 65 V
Current measurement: 0,1 - 25 A
Max. equalizing performance: 60 W
Max. equalizing current per cel: 0,25 A; 0,5 A; 1,0 A
Min. equalizing current per cel: 25 mA; 50 mA;100 mA
No. of cells equalized simultaneously: 2 bis 16
Equalizing accuracy: up to 3 mV (0,003 V)
Dimensions (W x D x H): 155 x 160 x 75 mm
Weight: ca. 1.200 g
Pulsar 3 - Setup und Grundbedienung
accessories for this item:
Connector cable P3-G4 for power supply with 4mm connector
Item no.: 1500
Availability:(Delivery time: 1-2 days)
ELPROG
16,00 €
incl. VAT
and excl. shipping
Pcs.
Connector cable P3-U8 for power supply with M8 bolts
Item no.: 1499
Availability:(Delivery time: 1-2 days)
ELPROG
16,00 €
incl. VAT
and excl. shipping
Pcs.
BT- communication module for Pulsar 3/3+ incl. mounting and antenna
Item no.: 1235
Availability:(Delivery time: 1-2 days)
65,00 €
incl. VAT
and excl. shipping
Pcs.
Battery pack ribbon cable incl. temperature sensor
Item no.: 1305
Availability:(Delivery time: 1-2 days)
ELPROG
9,00 €
incl. VAT
and excl. shipping
Pcs.
Accu interface EH (Uni) for Pulsar 3
Item no.: 1236
Availability:(Delivery time: 1-2 days)
ELPROG
29,00 €
incl. VAT
and excl. shipping
Pcs.
Accu interface XH for Pulsar 3
Item no.: 1237
Availability:(Delivery time: 1-2 days)
ELPROG
29,00 €
incl. VAT
and excl. shipping
Pcs.
Display glass for Pulsar 3 / 3+
Item no.: A2268
Availability:(Delivery time: 1-2 days)
ELPROG
4,99 €
incl. VAT
and excl. shipping
Pcs.
Power supply Mean Well RSP-2400-24 24V/100A 2400W
Item no.: 1555
Availability:(Delivery time: 3-4 weeks)
MeanWell
439,00 €
incl. VAT
and excl. shipping
Pcs.
Power supply Mean Well RSP-3000-48 48V/62,5A 3000W
Item no.: 1256
Availability:(Delivery time: 1-2 days)
MeanWell
499,00 €
incl. VAT
and excl. shipping
Pcs.
Accu interface Schambeck for Pulsar 3 - 2 x 5s EH
Item no.: A2125
Availability:(Delivery time: 1-2 days)
Florian Schambeck Luftsporttechnik
25,90 €
incl. VAT
and excl. shipping
Pcs.
Accu interface Schambeck for Pulsar 3 - 2 x 5s XH
Item no.: A2126
Availability:(Delivery time: 1-2 days)
Florian Schambeck Luftsporttechnik
25,90 €
incl. VAT
and excl. shipping
Pcs.
Accu interface Schambeck for Pulsar 3 - 2 x 6s EH
Item no.: A2127
Availability:(Delivery time: 1-2 days)
Florian Schambeck Luftsporttechnik
25,90 €
incl. VAT
and excl. shipping
Pcs.
Accu interface Schambeck for Pulsar 3 - 2 x 6s XH
Item no.: A2151
Availability:(Delivery time: 1-2 days)
Florian Schambeck Luftsporttechnik
25,90 €
incl. VAT
and excl. shipping
Pcs.
Accu interface Schambeck for Pulsar 3 - 2 x 7s EH
Item no.: A2172
Availability:(Delivery time: 1-2 days)
Florian Schambeck Luftsporttechnik
25,90 €
incl. VAT
and excl. shipping
Pcs.
Accu interface Schambeck for Pulsar 3 - 2 x 7s XH
Item no.: A2173
Availability:(Delivery time: 1-2 days)
Florian Schambeck Luftsporttechnik
25,90 €
incl. VAT
and excl. shipping
Pcs.
Protection and carry bag for Pulsar 3 / 3+
Item no.: A2366
Availability:(Delivery time: 1-2 days)
pp-rc Modellbau
39,90 €
incl. VAT
and excl. shipping
Pcs.
Temperature sensor for Pulsar 3 / 3+ (replacement)
Item no.: A2130
Availability:(Delivery time: 1-2 days)
ELPROG
14,00 €
incl. VAT
and excl. shipping
Pcs.
Temperature sensor NTC for Pulsar 3 / 3+
Item no.: A2074
Availability:(Delivery time: 1-2 days)
ELPROG
1,00 €
incl. VAT
and excl. shipping
Pcs.
V-Switch 48/12 V for Mean Well SPV1500/48
Item no.: 1577
Availability:(Delivery time: 1-2 days)
ELPROG
While stocks last! Still available: 1 Pcs.
19,00 €
incl. VAT
and excl. shipping
Pcs.
V-Switch 48/24 V for Mean Well SPV1500/48
Item no.: 1578
Availability:(Delivery time: 1-2 days)
ELPROG
While stocks last! Still available: 5 Pcs.
19,00 €
incl. VAT
and excl. shipping
Pcs.