Mainpage Infos & Ordering Terms & Condition DE Version

 

 

Technical specification:

  • Modes of Operation TEST, EQUAL and FAST

  • Type of Accus: Li-Pol, Li-Ion, Li-Ph (FePO4)

  • Operating Voltage 6 - 60 V; 2 - 12 cells Li-XX

  • Max. Equalizing Performance - 45 W

  • Max. Equalizing Current per Cell: 250 mA, 500 mA, 750 mA

  • Min. Equalizing Current per Cell: 25 mA, 50 mA, 75 mA

  • transfer the energy from the cells with the highest voltage to the cells with the lowest voltage

  • Equalize cells in accupacks with a capacity from 100 mAh to over 10 Ah

  • Timer: 0h, 2h or 4h

  • Emergency shut down: - 75 V / 15 A

  • Display LCD 133 x 64 Graph

  • Graphically visualized equalizing process (PC - RS232)

  • Air Cooler: Temperature regulated

  • Sound event notification

  • Dimensions ca. 120 x 110 x 34 mm

  • Weight abt. 300 g

    

Example of LCD display in process of equalizing 12S LiFe(Ph) was charged. It was in purpose highly unbalanced).  HERE You can download file in Pc-Graph format.

 

 

 

 TEST by "Modell Aviator" 5/08

Mit freundlicher Genehmigung vom Modell AVIATOR.

 TEST by "Elektromodell" 4/08

 

  

Description:

 

The Pulsar-EQUAL is a professionally designed and built, micro processor controlled balancer/equalizer. The Pulsar-EQUAL is able to equalize the voltage of single cells in an accupack in a very short time. All types of Lithium-Accus from 2 to 12 cells can be equalized. Because of the very high continuous performance even high capacity cells can be handled in a minimum amount of time.

 

The development of the Pulsar-EQUAL concentrated on offering most complete and precise information of each cell in an accupack. The display informs in detail about all operations in real-time and the voltage of all cells is visible at all times. The entire processing can be captured by a PC and allows interpretation and comparison at a later point in time.

 

In order to keep the charging time to the minimum, the Pulsar-EQUAL offers a very high equalizing performance of 45 W with a maximum equalizing current of 4 A, limited to 0.75 A per single cell. The Pulsar-EQUAL controls all charging parameters of the cells and is able to communicate with chargers like the Pulsar 2 or Akkumatik to reduce the charge or discharge current, if required. The Pulsar-EQUAL will even initiate an emergency shut down of the charging process, if the positive charging leads are connected to it.

 

During the equalizing process, the cells with the highest voltage in the accupack deliver the energy for the cells with the lowest voltage. This principle increases the overall efficiency and reduces the load on the power supply, e.g. a starter battery.

Technical data:

 

Type of Accus

Li-Ion, Li-Po, Li-Ph (Li-Ion FePO4)

Max. Equalizing Performance

45 W 

Max. Equalizing Current per Cell

0,25 A; 0,5 A; 0,75 A (continuous)

Min. Equalizing Current per Cell

25 mA; 50 mA ;75 mA (continuous)

Max. Operating Current of Pulsar-EQUAL

Up to 1,2 A

No. of Cells equalized simultaneously

1 to 11 (12 channels)

Modes of  Operation

Test, Equal, Fast

Operating Voltage

6 to 60 V

Quiescent Current

 

at 2 cells: 18 mA

at 12 cells: 10 mA

Timer

2 h; 4 h; unlimited

Display type / size

LCD / 133x64 mm

Emergency shut down at

75 V; 15 A

Air Cooler

Temperature regulated

Dimensions

120 x 110 x 34 mm

Weight abt.

300 g

 

Prices and order:

 

Pulsar-EQUAL Art.-No.: 1126 -

€ 219,- (incl. 19% VAT)   NOT IN STOCK
Pulsar-EQUAL-Akkuinterface EH-System (Uni) Art.-No.: 1127 - € 19,- (incl. 19% VAT)
Steckerleiste EH-System UNI Art.No.:  1128 - € 0,65 (incl. 19% VAT)
Pulsar-EQUAL-Akkuinterface XH-System Art.-No.: 1129 - € 21,- (incl. 19% VAT)
Steckerleiste XH-System Art.-No.: 1130 - € 0,80 (incl. 19% VAT)
Pulsar-EQUAL-Anschlussteilesatz Art.-No.: 1131 - € 9,- (incl. 19% VAT)

 

Downloads:

 

Pulsar-EQUAL Gebrauchsanweisung DE (pdf-file)

Pulsar-EQUAL Instruktion EN (pdf-File)

Akkuinterface UNI Gebrauchsanweisung DE (pdf-File)

Akkuinterface UNI Instruktion EN (pdf-File)

Akkuinterface XH Gebrauchanweisung DE (pdf-File)

Akkuinterface XH Instruktion (pdf-File)

EQUAL/EQmini PC-Software

EQUAL Firmware V1.10 UPGRADE  

 

Pulsar-Forum

 

EXTRAS

Pulsar-EQUAL akkuinterface EH-system (UNI) - Art.-No.: 1127

Interface allows easy and fast way to adapt various systems of connection accupack to EQUAL. Adapter has D-sub15 connector, cable to communicate with charger*, temperature sensor socket* and 3 lines of raster 2,50mm holes, which allows different configurations of connections.

EH connectors are used for example by companies: Graupner, Robbe.

Set contains two 7pins sockets (for 6 S accupack), which should be appropriately soldered.

* - adapted to Pulsar 2 charger

 

 Extra connectors 3, 4, 5, 6, 7, 8 PIN (for accupacks 2s, 3s, 4s, 5s, 6s, 7s). (Art. No.: 1128)

 

 

Pulsar-EQUAL akkuinterface XH-system - Art.-No.: 1129

 

Interface allows easy and fast way to adapt XH-systems (Dualsky, China Accupacks) of connection accupack to EQUAL. Adapter has D-sub15 connector, cable to communicate with charger*, temperature sensor socket* and 3 lines of raster 2,50mm holes, which allows different configurations of connections.

 

Extra connectors 3, 4, 5, 6, 7 PIN (for accupacks 2s, 3s, 4s, 5s, 6s). (Art. No.: 1130

 

 

Pulsar-EQUAL connector set - Art.-No.: 1131

 

Set which allows to create Your own system of connection!

To place an order please send any enquires by E-Mail to:  or by Fax: +49 4121 750676