Test by: "Elektromodell" 3/2009 SchiffsModell 7/2009

• LiPo controlling and balancing

• LiPo test (immediate charge and balance level)

• Pocket size

• Graphic display

• 6 channels

• 15 W Power

• Continuous current of up to 0.75 A per cell

• Variable power per channel (in 10 steps from 0 to 100 %)  

• Intelligent balancing

• Four modes of operation  (full control, fast, equalizing, test)

• Extremely low power needed

• Suitable for all types of Li cells (0,1 to more than 10 Ah)

• Full control of display (graphic display)

• Simple operation

• Prozess controlling

• Updateable via internet

• Independent equalizer cells, it can also have multiple channels simultaneously active

• Communication with Pulsar 2 and Akkumatik

• USB-Interface

• Real-time-mod to load all the individual cells voltages to pursue

• Programmable memorys

• Acoustic alarm

• Storage of the last settings (three memorys)

• High-quality aluminum cover

• Specially designed PC software

Description:

The Pulsar-EQmini is a professionally designed and built, micro processor controlled balancer/equalizer. The Pulsar-EQmini is able to equalize the voltage of single cells in an accupack in a very short time. All types of Lithium-Accus from 2 to 6 cells can be equalized. Because of the very high continuous performance even high capacity cells can be handled in a minimum amount of time.

The development of the Pulsar-EQmini concentrated on offering most complete and precise information of each cell in an accupack. The display informs in detail about all operations in real-time and the voltage of all cells is visible at all times. The entire processing can be captured by a PC and allows interpretation and comparison at a later point in time.

In order to keep the charging time to the minimum, the Pulsar-EQmini offers a very high equalizing performance of 15 W with a maximum equalizing current to 0.75 A per single cell. The Pulsar-EQmini controls all charging parameters of the cells and is able to communicate with chargers like the Pulsar 2, Pulsar 2+ or Akkumatik to reduce the charge or discharge current, if required.

Specification: Pulsar-EQmini; USB-Wire; Instruction; Software-CD-ROM

Technical data:

Link cable (Art.-No.: 1134) only for communication with charger Pulsar 2 and / or Pulsar 2+ 

Link cable (Art.-No.: 1135) only for communication with charger Akkumatik